| Customization: | Available |
|---|---|
| Color: | Grey, White etc |
| Material: | Cement, Non-asbestos |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Detailed Description
6 mm interior and exterior suspended ceiling fireproof fiber cement board
Fiber Cement Board (Non Asbestos)
Fiber Cement Board is a composite material made of quartz sand, cement and cellulose fibers. This product adopts imported pure paper pule from Canada, not included waste paper pulp. Fiber cement board is manufactured in a sheet form and they are used for interior and exterior suspension, partition and flooring application.The normal size is 1220×2440mm,thickness from 4~20mm, and density is 1.3~1.6g/cm3. There are low-density, middle-density and high-density.
Standard size:
| 1200*2400*4-20mm | Selectable other specifications Selectable abrasive finishing on right surface |
| 1220*2440*4-20mm | |
| 1220*2745*4-20mm | |
| 1220*3050*4-20mm |
| Size | Max Width: 1220mm | Max Length:3050mm | Thickness:4mm-20mm |
| Edge Type |
Square Edge |
L Edge |
Tapered Edge |
Specification
| Size (mm) | Thickness (mm) | Weight (Kg) | Edge Profile | Application |
| 1200*2400 | 4 | 18 | Square-cut edge | Internal cladding |
| 1220*2440 | 18.61 | |||
| 1200*2400 | 6 | 27 | square-cut edge/Recessed edge | Internal/External Cladding |
| 1220*2440 | 27.91 | |||
| 1200*2400 | 8 | 36 | square-cut edge/Recessed edge | Internal Partition/External wall cladding/ Wet area and tile backing/Floor underlay |
| 1220*2440 | 37.21 | |||
| 1200*2400 | 9 | 40.5 | square-cut edge/Recessed edge | External Wall Cladding/Wet area and tile backing/Floor underlay |
| 1220*2440 | 41.86 | |||
| 1200*2400 | 10 | 45 | square-cut edge/Recessed edge | |
| 1220*2440 | 46.51 | |||
| 1200*2400 | 12 | 54 | square-cut edge/Recessed edge | |
| 1220*2440 | 55.82 | |||
| 1200*2400 | 15 | 66.27 | Square-cut edge | Internal partitions with special requirements/elevated floor |
| 1220*2440 | 68.5 | |||
| 1200*2400 | 18 | 79.52 | Square-cut edge | Internal partitions with special requirements/elevated floor |
| 1220*2440 | 82.2 | |||
| 1200*2400 | 20 | 88.36 | Square-cut edge | Internal partitions with special requirements/elevated floor |
| 1220*2440 | 91.33 |
| Product name | Density (g/cm3) |
Antiflex cracking strength
Mpa |
Water absorption rate
%≤ |
Water impermeability |
Freezing resistance |
Incombustibility | Radioactivity |
| Fiber cement board | 1.1~1.4 | 14 | 35 | After 24 hours of water immersion, no water droplets appear on the bottom surface | 25 cycles of freeze-thaw, no delamination, etc. | Conforming to GB8624 A Class | Conforming to GB6566-2001 A Class |
| 1.4~1.7 | 18 | 26 |
| Application | Performance advantages | |
| Exterior Wall | Exterior decoration panel | Surface flat and smooth, can meet higher requirement for coating |
| Integrative façade panel for exterior wall thermal insulation | ||
| Interior wall decoration panel | Easy for different surface processing, like UV, Polyester, Inorganic, Marbling etc. | |
| Flooring | Loft interlayer | High strength and toughness |
| Container house | ||
| Light steel villa | ||
| Other application | Subway/Tunnel/Baseboard | High strength and toughness, large size, smooth surface, and easy for surface treating |
| Outdoor furniture | ||
| Thinner lining board for stone | Smooth surface and high strength | |
Property
1. 100% non-asbestos
2. Density: 1000-1400kg/m3
3. Coefficient of thermal expansion: 0.24W/MK(JCIT54)
4. Bending strength: Over 13 Mpa (GB/T7019-1997)
5. Linear expansion rate: 0.1%
6. Water absorption rate: Less 0.19% (GB/T7019-1997)
7. Water penetration rate: 0%
8. Water content: 10%
9. Incombustibility according to cns 6532 and bs 476
10. Two point five three hours of fire rating for (6mm wall system with concrete)
11. Radioactivity: Standard (GB6566-2000)
12. Characteristic: Non-flammability A Grade(GB-8624-1997)
Type of Exterior wall cladding Fiber Cement Board
Plain fiber cement board
Woodgrain fiber cement board
Acoustic perforating fiber cement board
Siding fiber cement board
1)Q:What's your delivery time?
A: 15-20 days after receive the deposit.
2)Q: What's your payment?
A: T/T, 30% as sown payment and balance after B/L or irrevocable L/C.
3)Q: Can you do customized product?
A: Yes, we can cut any sizes as required.
4)Q: What's your company production capacity?
A: We can produce 8000 sqm (10 mm) per day.
5)Q: What's your MOQ? Can we order mixing different sizes?
A: Yes. MOQ is 100 pcs and mixed loading also acceptable.
6)Q: Are you trading or Manufacturer?
A: We have two factories and one trading company.
Zhangjiagang Oriental Construction Materials Co.,Ltd(OCM) is produce basic Fireproof board.
Zhangjiagang Oriental New Construction Materials Co.,Ltd is produce further processed materials.
We developed two building systems based on Mgo products. All products export through OCM trading company.
){kind=link}